Alereon Wireless USB Adapter

This is the driver for the Alereon Wireless USB adapter. The driver was driver version 1.0.162.0. This driver was released in 2011 and the internal files show that this has been labeled as many things. These have been added below with the file itself.

Alereon Wireless USB Adapter

Note that this driver has been used in a number of devices. These are the Aleron devices which is a wireless USB adapter as well as the IOGEAR and ICREON wireless adapters. These are listed as follows as their hardware is much the same. The driver will work on the Aleron as well as others:

• Alereon Device Wire Adapter
• Alereon Wireless USB Graphics Adapter w/ Audio
• IOGEAR Wireless USB Hub
• ICREON Device Wire Adapter

The Alereon Wireless USB Adapter boasts a range of impressive features. Using ultrawideband (UWB) radio technology, it develops Certified Wireless USB and WiMedia Alliance-compliant UWB integrated circuits. This adapter supports 720p HD video and digital stereo sound, as well as 1080P for still images. It facilitates both mirror mode and extended mode for versatile display options.

In addition, the adapter ensures a wireless connection up to 10 meters, effectively reducing cable clutter in your setup. Its user-friendly driver installation and auto pairing feature enhance convenience. Notably, the adapter offers two modes of operation: a driverless mode that requires no additional software installation and a Host Wire Adapter (HWA) mode for advanced functionality.

It’s important to mention that specific features may vary based on the exact model of the Alereon Wireless USB Adapter. For the most precise and detailed information, consulting the product’s user manual or reaching out to Alereon directly is recommended.

Note that there are other drivers as well. There is the driver bluetooth csr 5.0 dongle as well as the bluesoleil generic bluetooth driver and the Android Composite ADB Interface.

The Alereon Wireless USB Adapter offers two installation modes: driverless mode and Host Wire Adapter (HWA) mode.

Driverless Mode: In this mode, no additional drivers are needed. Installation is straightforward; simply insert the Alereon Wireless USB Adapter into an available USB port.

Host Wire Adapter (HWA) Mode: To enable this mode, you need to install the Wireless USB Manager. Here’s how:

1. Alereon provides MSI-based installers tailored for specific platforms:
   • Setup_wusb_X86_XXXX.msi is for 32-bit systems.
   • Setup_wusb_X64_XXXX.msi is for 64-bit systems.
2. Launch the installation process by double-clicking the appropriate MSI package.
3. Follow the on-screen instructions to install Alereon’s Wireless USB Manager.
4. Note that the Wireless USB Manager requires Microsoft .NET 2.0. You can install this software manually before setup, or connect your PC to the internet and the setup will automatically download this dependency.

For detailed instructions and usage guidelines, consult the Wireless USB Manager User’s Guide. If you encounter any difficulties during installation, reaching out to Alereon’s customer support for assistance is recommended. Likewise see also the Dell Vostro 1540 Notebook 1701 Bluetooth and RTL8187 Wireless Driver Windows 7 on here.

.

Installation 

Now there is also the Dynadock wireless USB adapter as we all the Toshiba and Samsung wireless adapter. You will note again that many of these use the exact same hardware. See also the Sweex LW053 Driver on here.

• Dynadock Wireless USB Docking Station
• Toshiba Wireless USB Hub
• Toshiba Wireless Mini Dock
• Samsung Wireless Monitor

The Samsung is similar to the Alereon. Download the file and then extract the file. Inside you will find the aldwa.inf file which you will right-click on it. From there you can click on install on the new menu that shows. The device will now install and it will prompt Windows to show that it found new hardware. This is easy to do and can run even on the Windows 10 operating system. The INF install is the easiest. The download file has been added below. You can also clear your hard driver with the CCleaner download on here. Finally the Bluetooth driver for windows 7 32-bit Acer as well.

Hardware ID

These hardware ID’s will work with this driver.

The driver works with the Alereon Device Wire Adapter, Alereon Wireless USB Device (AL5350 Cozumel). Likewise the IOGEAR Wireless USB Hub as well as the ICREON Device Wire Adapter.

How to install Alereon Wireless USB Adapter with an inf file.

Certainly, here are the steps to manually install a driver using an .inf file in Windows 10/11:

Locate and Install the INF File:

1. Open Windows File Explorer and navigate to the folder containing the INF file you wish to install.
2. Right-click on the INF file and choose “Install”. If prompted by User Account Control, click “Yes”.
3. Once the installation is successful, click “OK” to complete the process.

Alternative Method through Device Manager:

1. Open Device Manager: Press the Windows key and ‘R’ simultaneously to open the Run dialog box. Type devmgmt.msc and press Enter.
2. Update Driver: In Device Manager, find the device for which you downloaded the driver. Right-click on the device and select “Update Driver”.
3. Locate the Driver: Choose “Let me pick from a list of device drivers on my computer” and then click on “Have Disk…”.
4. Select INF File: Click “Browse…” and navigate to the folder where the driver is located. Open the folder, select the .inf file, and click “Open”.

Please keep in mind that these instructions are specific to Windows 10/11. If you encounter any issues during the installation process, it’s advisable to seek assistance from Alereon’s customer support. There is also the AmbiCom WL54 and the Apple Bluetooth driver as well. Likewise see also the HP Broadcom Wireless LAN Driver on here.

Alereon Wireless USB Adapter

(Click on accept as Chrome blocks the files)