This is the ASUS VivoBook 14 X412UA IO UART Driver. This is the driver for the ASUS VivoBook 14 X412UA. You will note that this is an Intel Kabylake UART controller much like other computers in the Asus stable such as the VivoBook 15 F512DA UART as well as the VivoBook 17 F712FA UART and the ASUS ZenBook S13 UX392FN UART Driver. You will also see that there are three different ways to install the UART driver as you can see below. There are a number of UART drivers on this website as well.
ASUS VivoBook 14 X412UA IO UART Driver
Its for older equipment but this is a few years old. This is the latest driver from Asus which was released in May 2019. You can see the list of files below and you can install the driver by right-clicking on the inf file and then click on install. You can also click on the install file or simply install the driver in the device manager.See the files in the zip file below.
How to install ASUS VivoBook 14 X412UA IO UART Driver from inf file
To install the ASUS VivoBook 14 X412UA IO UART Driver using an inf file, follow these steps:
- Download the Intel Serial IO Driver for ASUS VivoBook 14 X412UA: Obtain the necessary driver file for your ASUS VivoBook 14 X412UA.
- Unzip the Downloaded File: Extract the contents of the downloaded file to your system.
- Locate the INF Files: Identify the INF files within the extracted content, such as iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf.
- Install the INF File: Right-click on the chosen INF file and select the ‘Install’ option from the menu to initiate the installation.
- Confirm Installation: Click on the ‘Yes’ button in the pop-up window to confirm the installation process.
- Reboot the System: After installing all the drivers, reboot your system to ensure the changes take effect.
- Backup Your Data: Always back up your data before making any changes to your system to prevent data loss.
- Contact ASUS Support if Issues Arise: In case of any problems or issues, it’s advisable to reach out to ASUS support for assistance.
Note: Numbers in superscript (1, 2) are used to indicate the corresponding steps and additional notes.
Note the install.cmd file as well as the .inf file which has been shown above. Likewise see also the Intel UART Whiskey Lake Drivers and the ASUS VivoBook Pro 15 N580GD Intel UART Driver.
How do I know if the driver has been installed successfully?
To verify the successful installation of a driver, follow these steps:
- Open Device Manager: Likewise open Device Manager and locate the specific device for which you want to check the driver version.
- Access Device Properties: Right-click on the identified device and select the Properties option.
- Navigate to Driver Tab: Click on the Driver tab within the device’s Properties.
- Check Driver Version: Likewise examine and note the installed driver version for the selected device.
- Identify Installation Issues: If the driver installation was not successful, you may observe a yellow exclamation mark next to the device. This indicates an issue that needs attention.
- Review Recent Driver Updates: Likewise to review your most recently installed drivers, including their date and version number, navigate to Windows Update > Update history. Expand the section labeled “Driver Updates” for a detailed overview.
- Automatic Driver Checks: Keep in mind that Windows has the capability to automatically check for available drivers for new devices connected to your computer.
- Manual Update for Past Devices: For hardware connected in the past, updated drivers might not install automatically. In such cases, you may need to manually check for and install updated drivers.
Note: Numbers in superscript (1, 2, 3) are used to indicate the corresponding steps and additional notes. See also the articles on the ASUS VivoBook 14 F412DA Intel IO UART Driver and ASUS VivoBook 15 X512FA UART Driver Win10 64-bit.
ASUS VivoBook 14 X412UA IO UART Driver
