Axesstel AXV-D450 Router

This is the Axesstel AXV-D450 router details. The login username and password as well as how to change the IP on the router. This as well as how to change the DNS on the Axesstel AXV-D450 router. This is easy to follow as there is no user manual for the router. The default username and password as well as the login default IP has been added below.

Axesstel AXV-D450 Router

These are the basic instructions for the router. Much like other routers on here there is the default IP’s when it comes to routers. The username and password will however not be the same. A good example is the Aztech Router Username Password as well as the Aztech DSL7000GRV-S routers which is also on this website. You can also see those fore more information. There is also the Defender USL 116 driver on here.

Change the IP Address on a Axesstel AXV-D450 

The most common IP’s for the Axesstel AXV-D450 are the IP’s 192.168.0.1 | 192.168.1.1 | 10.0.0.1 . The login for the Axesstel AXV-D450 router is admin | admin.

After logging into the Axesstel AXV-D450 you will need to click on the tab called “Network” on the top of the screen. Where is says “IP Address” you will need to click in there and type in the new IP address that you want.

The IP address is the one you used to login to the router. Normally this is 192.168.0.1 but you can change this to anything that you want. Remember that the Subnet Mask at 255.255.255.0 must stay the same or it will not connect to your network again.

Axesstel AXV-D450 username and password

The login for the Axesstel AXV-D450 router is admin | admin

Change the DNS Settings on the Axesstel AXV-D450 

If you want to change the DNS settings on the Axesstel AXV-D450. Then much like above you will need to login to the router with the default username and password. Once you login then complete the following. Then click on “network” on the top of the page and then click and place the primary DNS server and IP belongs. You then add the new DNS server in the blank areas. The Primary as well as the Secondary DNS server IP’s are:

Google Public DNS, use the following settings:

• Primary: 8.8.8.8
• Secondary: 8.8.4.4

OpenDNS, use the following settings:

• 208.67.222.222
• 208.67.220.220

Once you enter this then click on “save” and the DNS server will now be changed. Turn your router off and then on again.