Aztech DSL1000EW-L Router

You need the default username and password for the Aztech DSL1000EW-L Router. See the username and password below. This is the default login credentials for the Aztech DSL1000EW-L Router. You can also see how to change the DNS on the router, as well as change the IP address. There is also an option to change the WiFi password and the SSID of the wireless network. Its all to easy.

Aztech DSL1000EW-L Router

This is the default login and you will note that the login IP on the Aztech routers are mostly standard. You will also see the user manual that you can see how to reset your router. The Aztech DSL1000EW-L manual will show you how to do a hard reset of the router. Note however that you might not be able to connect the the internet again. Most times the ISP’s put their own settings in there. Doing a reset takes it back to the original factory settings and not that of the ISP. Be careful about this.

[toggle title=”Aztech Default Settings” state=”open”]IP – 192.168.1.1[/toggle]

If that IP does not work then try these

• 192.168.0.1
• 192.168.1.1
• 10.0.0.1

Model	Username	Password	Image	Manual
DSL1000EW-L	admin	admin		Aztech DSL1000EW (L) Manual

If you are looking for another router from Aztech then you can search here as well as here. We are going to explain three of the main tasks. The username and password for the router is above if that is what you came for.  We will now explain how to change the DNS servers to those of Google as well as changing the SSID or network name of your WiFi and change its password.

How to change the IP Address on a Aztech DSL1000EW-L router.

Login > Advanced Setup > Click on LAN > Choose an IP address
Leave Netmask at 255.255.255.0 and leave DHCP server as enabled.
Click on Apply

How to change the DNS on a Aztech DSL1000EW-L router.

Login > Click Advanced Setup (Side Menu) > Click on DNS Setup (Side Bar) > Click on (Use the following Static DNS IP address)
Now enter the DNS servers IP’s
Click on Apply

How to change the SSID and WiFi password on a Aztech DSL1000EW-L router.

Login > Click Advanced (Side Bar) > Click Wireless (Left Bar) > Click Basic > Enable Wireless > Enable Hide SSID > Type in your SSID (Your wireless network name) > Click Apply
Click Security (Left Bar) > Click Manual Setup AP > Drop Down (Network Authentication) > Select WPA 2 > Type in your new Wifi password (WPA2 Pre-Shared Key) > Click WPA Encryption (Select AES) > Click Apply > Click on restart the Aztech DSL1000EW-L.