This is an Intel USB driver for the Biostar Hi-Fi H170S3H USB 3.0 Driver. The Windows OS normally installs a generic driver for the USB on all motherboards however this is the driver which was designed for the board. Note that the specific USB driver will benefit from improved compatibility with different devices, numerous fixes regarding USB issues.
Biostar Hi-Fi H170S3H USB 3.0 Driver
The driver which is listed below comes from the Biostar website itself. You will need to download the file onto your hard-drive for it to install properly. If you install it on a thumb-drive it might give an install error. See the Biostar website for more information about the driver. There is also the Benq scanner 4300 on this website.
Hardware ID
USB Ports on the Motherboard
The Biostar Hi-Fi H170S3H USB 3.0 motherboard provides the following USB hardware options:
- 4 x USB 3.0 Ports: Located on the back I/O panel for external devices.
- 1 x USB 3.0 Header: Allows additional connections via internal headers inside the computer.
- 2 x USB 2.0 Ports: Found on the back I/O panel for various USB devices.
- 2 x USB 2.0 Headers: Available for extra connections internally via headers.
Please keep in mind that the actual number of usable USB ports can vary depending on the computer case and other hardware configurations. Likewise also see the ASUS TUF Drivers as well as the FT232R and FT245R USB UART Drivers.
Motherboard
To install the USB 3.0 driver for the Biostar Hi-Fi H170S3H, follow these steps after downloading the driver from the official Biostar website:
- Extract the Downloaded File:
- After downloading the driver, extract the files to a folder of your choice on your computer.
- Access Device Manager:
- Right-click on the Start Menu and select “Device Manager” from the context menu.
- Update Driver Software:
- In Device Manager, locate the hardware device you want to update (likely under “Universal Serial Bus controllers”).
- Right-click on the device and choose “Update Driver Software.”
- Choose Manual Driver Update:
- Select “Browse my computer for driver software” to manually locate the driver.
- Browse to the Extracted Folder:
- Click on “Browse” and navigate to the folder where you extracted the downloaded driver files. Select the folder.
- Complete the Installation:
- Click “Next” and follow the on-screen instructions to finish the installation process. Windows will install the USB 3.0 driver from the specified folder.
By following these steps, you’ll successfully update the USB 3.0 driver for your Biostar Hi-Fi H170S3H motherboard.
There is also the Samsung USB driver for mobile phones on this website if you have a Samsung mobile phone. The Biostar Hi-Fi H170S3H motherboard features a Realtek RTL8111H LAN controller for network connectivity and utilizes the Realtek ALC887 audio codec for sound processing. As well as the most common error being the Samsung USB device not recognized and the software.
Biostar Hi-Fi H170S3H USB 3.0 Driver
(Click accept as Chrome blocks the file)
- Unique Post