D-Link DU-CS Driver

If you need the driver for the D-Link DU-CS adapter then you will find the driver below. This is the D-Link Serial Converter. Note that this is a Windows 2000 and Windows XP driver for the adapter. Before you install a new driver ensure that you have removed the old one and virus scanned the new file before install.

D-Link DU-CS Driver

Note that the hardware string only lists the following for the driver and will only work on this hardware as listed. These are “USB Serenum Filter Driver” and also “D-Link Serial Converter Driver Disk”. You can see the d-link cp driver here as well as the lucent driver as well. There is also the D-Link Serial Converter as well as the d link dib 120 and the wd ses device usb device as you can see.

This is a Windows XP driver. There are still millions of machines running Windows XP on the market. The D-Link DU-CS driver can be installed below. Note that this is again a Windows XP driver. Download the file and extract the content. There are only two files in there. The SYS file as well as the INF files. This will allow you to run the driver in Windows 10 or on Windows 11. Note again you will note that this is old hardware.

You will need to right-click on the U2SXP.INF and the click on install. This will install the basic driver. Windows will then show that it has detected new hardware and install the SYS file for you. The device will now work. If this does not work then right-click on the file again and click on the “compatibility troubleshooter”. Windows 10 and Windows 11 will then attempt to run it in an emulator mode. Test both installs for a modern computer. If you have a Windows XP machine then the install method works the easiest without an issue.

D-Link DU-CS Driver