Linksys USB200HA Driver

The Linksys USB200HA driver was release din March 2016 and it is version 2.29.0.8. This will run on any version of Windows except Windows 10. It will also run on a Mac as well as Linux. This is a very small driver file which you can download below.

Linksys USB200HA Driver

The driver below has added functionalities or fix bugs from older versions for this Linksys hardware. The is the Linksys AE3000 router as well as the Linksys USB200HA and the Linksys WUSB11 as well as the Linksys WUSB54GC. The device is identified as the Linksys Phoneline 10M USB Network Adapter which this is. This is an old driver for one of the older driver which was released on 09/02/2001. The version is the 2.29.0.8. The hardware ID for this is USB\VID_066B&PID_2207.

The Linksys USB200HA is a cool gadget that’s part of the HomeLink Series. It’s a Phoneline 10M USB Network Adapter. This means it lets you connect to a network super quickly from a computer, laptop, or even a USB hub that has a USB port. All you have to do is plug a regular telephone cable into the adapter, install the drivers that come with it, and voila! You’re connected to the network.

You can download the driver for the Linksys USB200HA from the website of the people who made it. Make sure you install the driver software properly so your network adapter works at its best. If you need any help or guides, you can find them on the Linksys Official Support page. Likewise see also the Linksys WUSB600N Driver. Note also the 8 Tips to Choose the Perfect ASUS Router on here.

• 1. Start your PC, then insert the USB Network Adapter into an USB port in your PC .
• 2. After starting Windows XP, the USB will be detected automatically, then the Found New Hardware window appears.
• 3. Insert the Installation diskette into floppy disk drive.
• 4. Note that yout then click the Next button in the Install Hardware Device Drivers window.
• 5. Click Continue Anyway button, then the Windows XP starts to copy the driver to the user’s hard disk.
• 6. Click Finish button.

1. Plug in the Adapter: First, plug the Linksys USB200HA adapter into one of your computer’s USB ports.
2. Get the Driver: Secondly go to the Linksys website and find the right driver for the USB200HA adapter. Make sure to choose the one that matches your computer’s operating system.
3. Unzip the Files: Thirdly after downloading the driver, open the downloaded file. It might look like a folder or a compressed file. If it’s compressed, you’ll need to unzip it. This is like opening a present to get to the good stuff inside!
4. Install the Driver: Lastly, inside the unzipped folder, there should be a file called setup or something ending with .INF. Right-click on this file and choose “Install.” Your computer will follow some instructions, and the driver will be installed.
5. Restart Your Computer: Note that after the installation is done, it’s a good idea to restart your computer. Lastly this helps your computer recognize the new driver.
6. Check Device Manager: Likewise, to make sure everything worked, go to Device Manager. You can find it by right-clicking the Start button. Look for the Linksys USB200HA adapter under “Network adapters.” If it’s there without any warning symbols, you’re all set!

Likewise, if you run into any problems, you can always check the instructions that came with the adapter or ask someone for help.

Linksys USB200HA Driver