Download the Longshine LCS-8131C driver here. This is the “C” version of the Longshine wireless adapter range. You can see the complete list of Longshine adapters on this website. There is also the Longshine LCS-8131A version and the Longshine LCS-8131B version. listed. They will not work without the correct driver version for each. You cannot run “B” on the software of “C”. The driver is listed below.
Longshine LCS-8131C driver
The Longshine LCS 8033H as well as the Longshine LCS 883R with the Longshine LCS-8131C are not the same hardware. This also goes for the Longshine LCS-8033H even thought they are labeled in a similar fashion. You will also find the wd ses device usb device on this website as well as the cp2102 usb to uart bridge controller and the usb rs232 driver.
Note that the hardware ID is USB\VID_03eb&PID_7605 for this device.
This is an old driver as the PCMCIA cards are today very rare. Download the ZIP file and then extract the content. Click on the EXE file and it will install on a Windows XP system or Windows 98 system. If you want to install this on a Windows 10 system then it may be difficult. Download the extract the files. Once done go into the directory in this case the AP directory and then Windows 2000. Then right-click on the INF file and then click on “install”. Windows 7 and Windows 10 will then install the driver for you in an emulation mode.
Longshine LCS-8131C
(Click on accept as Chrome blocks the download)
Related Posts
- Longshine LCS-8131A driver (1.000)
- Longshine LCS-8131B Wireless (1.000)
- Longshine LCS-8131R Wireless (1.000)
- Longshine LCS-8131G3 USB Wireless (1.000)
- Longshine LCS-8131M driver (0.510)