Download the USB driver for Samsung Galaxy Ace 4 (SM-G357FZ) below. If you are developing an android app for your mobile phone and you connect the Galaxy Ace 4 to your computer it might give you an error. The most common error is that the USB driver cannot be found and that SM Bus Controller cannot be found. You will need to download the Galaxy USB driver for this.
USB driver for Samsung Galaxy Ace 4 (SM-G357FZ)
The error might be as follows when you install it. It says: “The installation of the driver was not successful”. This is not uncommon when it comes to Samsung products. We have also listed the issue here. This is where the computer will not see the hardware or the phone that has been connected. The can also be USB errors which you might need to look at. The most common issue is where the USB port is damaged. This or where the the front USB port on the motherboard does not work excpet for the rear USB ports. See also the Galaxy Note Edge Drivers on here.
USB controller | Driver not found
SM bus controller | Driver not found
First you will need to uninstall the USB driver already on your computer as well as the SM bus controller. This means uninstalling the USB root hub on your computer. Then you will need to reboot the computer and install the driver again without the mobile phone connected to the computer. Once installed then only connect the phone via the USB tether. Again check the USB ports as written about above where you computer might only take the USB ports at the rear. Samsung Galaxy S7 driver Windows 10 as well as the Samsung ADB drivers as with the Samsung Galaxy Note 2 drivers. You will also find the driver Samsung Galaxy Ace on here too.
Download the Samsung USB driver first before you uninstall the driver. You can see on the link how best to get the Samsung Galaxy Ace 4 mobile phone to work. This is a generic driver which works on all Samsung products.
