usb\vid_0c45&pid_602c&rev_0101

The usb\vid_0c45&pid_602c&rev_0101 Hardware ID is for the Microdia Clas Ohlson TWC-30XOP Webcam. This is a generic camera chipset. Download the driver here. There are a number of Hardware ID’s with the usb\vid_0c45&pid_602c&rev_0101 as you will note below. Download the driver below. See also the Hardware ID called usb\vid_0c45&pid_602c&rev_0101 which is compatible as well.

usb\vid_0c45&pid_602c&rev_0101

Table of Contents

This is generic hardware which has been used in many cameras including the Sonix camera. The ID for the Hardware can be broken down as follows. In addition we can break down the Hardware ID of usb\vid_0c45&pid_602c&rev_0101 as well as the usb\vid_0c45&pid_6130&rev_0101 as well. The ID tells us that this is a Microdia Clas Ohlson TWC-30XOP Webcam. In addition the PC Camera (SN9C120). We can also see the PID as well as the Vendor ID on the hardware.

Additionally the Vendor ID (VID) 0c45 identifies the hardware vendor which we know is ATEN. Again we all know that ATEN made many of the hardware. The Vendor 0c45 is the Microdia vendor code. In addition the Product ID (PID) pid_2008. Likewise this identifies the product as the Microdia Camera and PC Camera (SN9C120). Note also the there is a Revision Number (REV) rev_0300. So we now know that this Hardware ID is for the Microdia Camera. This is from the Microdia Camera and PC Camera (SN9C120) products. The full installation and troubleshooting can be found under the page Sonix USB Camera on here.